ENGLISH 8
the grease lter may become dull; this does
not effect its ltering capacity.
Greaseltermaintenance:
1. Disconnect the hood from the electric
power supply.
2 Remove the grease lters: pull the spring
release handle downwards, then remove
the lter.
3. After cleaning the grease lter, remount
in reverse order ensuring the entire
extraction surface is covered.
Charcoalltermaintenance(ifthehoodis
installedinrecirculationmode)
1. Remove the grease lters.
2. Fit the lter/s over the motor according
to the model:
- • align the pins on the cowl with the
slots, then turn the lter clockwise until it
locks in place.
3. Reverse the above procedure to remove
the charcoal lter.
4. Ret the grease lters,
Charcaol lter is neither lavable nor
regenerable.
Replace it every 4 months.
Lampmaintenance
Disconnect the hood from the electricity.
Warning
Prior to touching the light bulbs ensure they
are cooled down.
1. Use a small screwdriver or other suitable
tool to prise off the cover.
2. Snap-t the cover back on.
3. Use only max 12V-20W- G4 halogen
bulbs.
Important: make sure you don’t touch the
lamp with your hands.
Kommentare zu diesen Handbüchern