
ENGLISH 8
WARNING:- Never use steam
cleaning equipment.
- Disconnect the appliance from the power
supply.
IMPORTANT:do not use corrosive or
abrasive detergents. If any of these products
accidentally comes into contact with the
appliance, clean immediately with a damp
cloth.
• Clean the surfaces with a damp cloth.
If it is very dirty, add a few drops of
washing up detergent to the water.
Finish off with a dry cloth.
IMPORTANT: do not use abrasive sponges
or metallic scrapers or scourers. Over time,
these can ruin the surface.
• Use detergents specically designed for
cleaning the appliance and follow the
manufacturer instructions.
IMPORTANT: clean the lters at least
monthly to remove any oil or grease
residuals.
Tocleanthegreaselter
Wash the grease lter at least once a
month.
1. Unplug the appliance or disconnect the
power supply.
2. Remove the grease lters: pull the spring
release handle downwards, then remove
the lter.
3. After cleaning the grease lter, remount
in reverse order ensuring the entire
extraction surface is covered.
Carbonltermaintenance
1. Unplug the appliance or disconnect the
power supply.
2. Remove the grease lter
3. Remove the screw and then the lter
holder
4. Fit the carbon lter in the lter holder
5. Ret the lter holder and secure it to the
hood with the screw
6. Ret the grease lter.
Unlike traditional carbon lters, this carbon
lter can be washed and reactivated.
With normal hood use, the lter should be
cleaned once a month.
The best way to clean the lter is in a
dishwasher at the highest temperature
possible, using a normal dishwasher
detergent. To avoid particles of food or
dirt settling on the lter during washing
and giving rise to unpleasant smells, it is
advisable to wash the lter on its own.
After washing, dry the lter in the oven at
100°C for 10 minutes to reactivate it.
The lter will retain its odour-absorbing
capacity for three years, after which it will
have to be replaced.
Cleaningandmaintenance
Kommentare zu diesen Handbüchern